Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Outside NAT / Port Translation assistance needed

The picture explains it all really...

I'm having trouble configuring two public external IP addresses (1.1.1.2 and 1.1.1.3) that point back to the same host but different ports (443 for the former and 8443 for the latter).

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Outside NAT / Port Translation assistance needed

Assuming that you have your web servers in the DMZ:

a)static (DMZ,outside) tcp 1.1.1.2 https 2.2.2.2 https netmask 255.255.255.255

b)access-list HTTPS-OUT extended permit tcp any host 1.1.1.2 eq https

c)access-group HTTPS-OUT in interface outside

For the second entry you may need to do this.

a)static (DMZ,outside) tcp 1.1.1.3 https 2.2.2.2 8443 netmask 255.255.255.255

b)access-list HTTPS-OUT extended permit tcp any host 1.1.1.3 eq https

c)access-group HTTPS-OUT in interface outside

1 REPLY
New Member

Re: Outside NAT / Port Translation assistance needed

Assuming that you have your web servers in the DMZ:

a)static (DMZ,outside) tcp 1.1.1.2 https 2.2.2.2 https netmask 255.255.255.255

b)access-list HTTPS-OUT extended permit tcp any host 1.1.1.2 eq https

c)access-group HTTPS-OUT in interface outside

For the second entry you may need to do this.

a)static (DMZ,outside) tcp 1.1.1.3 https 2.2.2.2 8443 netmask 255.255.255.255

b)access-list HTTPS-OUT extended permit tcp any host 1.1.1.3 eq https

c)access-group HTTPS-OUT in interface outside

101
Views
0
Helpful
1
Replies