We configured a new VPN tunnel on our VPN concentrator 3005. Local IP address for this tunnel 10.0.0.100/32 and we named this as X_local. There was another network-list names as Y_local which also has 10.0.0.100/32. After we configured the new tunnel, the old tunnel become problematic. 10.0.0.100 couldn't reach remote network and the old tunnel didn't become UP. We logged out from the new tunnel then the old one started working. Now two of them are working. However i think we should know reason of this problem for a better workaround. Anyone knows reason???
Add-on: The old one becomes UP, but we have to wait for a while(10-20 ping timeouts). When we log out the new one, it becomes UP after one timeout.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...