please i have a problem in my Cisco VPN 3005 Concentrator and he show me this logs
the logs : 4366 05/16/2014 09:33:26.000 SEV=2 HARDWAREMON/8 RPT=52511 Fan 2 alarm is active 4367 05/16/2014 09:33:27.000 SEV=2 HARDWAREMON/8 RPT=52512 Fan 2 alarm is inactive 4368 05/16/2014 09:33:30.000 SEV=2 HARDWAREMON/8 RPT=52513 Fan 2 alarm is active 4369 05/16/2014 09:33:31.000 SEV=2 HARDWAREMON/8 RPT=52514 Fan 2 alarm is inactive 4370 05/16/2014 09:33:34.000 SEV=2 HARDWAREMON/8 RPT=52515 Fan 2 alarm is active 4371 05/16/2014 09:33:35.000 SEV=2 HARDWAREMON/8 RPT=52516 Fan 2 alarm is inactive 4372 05/16/2014 09:33:38.000 SEV=2 HARDWAREMON/8 RPT=52517 Fan 2 alarm is active 4373 05/16/2014 09:33:39.000 SEV=2 HARDWAREMON/8 RPT=52518 Fan 2 alarm is inactive 4374 05/16/2014 09:33:42.000 SEV=2 HARDWAREMON/8 RPT=52519 Fan 2 alarm is active 4375 05/16/2014 09:33:43.000 SEV=2 HARDWAREMON/8 RPT=52520 Fan 2
Open it up and check the power for your fan. It appears to be intermittent or else the fan itself is failing.
The VPN 3005 is a very old device and it would not be unusual to see it fail after so many years. It is no longer sold or supported. (Sales stopped almost 7 years ago - announcement.) You may be able to find a 3rd party reseller with spare units or use a standard "muffin fan" in place of the original equipment if you are handy with hardware repair.
You should consider upgrading to a current generation device like an ASA 5512-X.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...