Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Performance Monitor

I want to configure Performance monitor for PIX firewall. But I am not able to configure. Getting errors.

I am only able to configure it for concentrator but not for PIX.

I will be very greatful to you. Also tell me how to clear the error devices from cisco performance monitor and configure emial notification.

My firewall configuration:

TDC-INT-525-01# sh run | in snmp

snmp-server host inside 172.28.32.50 community ciscoworks123

no snmp-server location

no snmp-server contact

snmp-server community ciscoworks123

snmp-server enable traps snmp authentication linkup linkdown coldstart

snmp-server enable traps syslog

TDC-INT-525-01# sh run | in domain

domain-name default.domain.invalid

domain-name default.domain.invalid

Kindly also the attachment for the following errors that i m getting in performance monitor.

2 REPLIES
Anonymous
N/A

Re: Performance Monitor

Make sure to provide the ip address of the server where you have MCP installed. Use the command pix(config)# snmp-server host . Set the SNMP community string to public.

New Member

Re: Performance Monitor

Thanks for the reply. I have configured all the required parameters. infact MCP that version is not supported by pix.

Thanks for the reply.

162
Views
0
Helpful
2
Replies
CreatePlease login to create content