Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ping between Cisco VPN Clients

Hi folks,

I installed a Pix with some vpn clients, and they are working fine, however customer says it would be better if we can share some resources between diferent vpn clients (files, printers).

HOWEVER I DO NOT HAVE ANY PING AT LEAST BETWEEN THEM.

I have notice clients does not have default gateway ( I think they need it) however, i don not find where and how to do it.

- they have tunnel splitter enable

- Clients are, Cisco vpn client ver 4.0.5

- Pix IOS version 6.3.5

Can somebody help me ?

Thanks in advanced

Martin

3 REPLIES

Re: Ping between Cisco VPN Clients

Hi

Can you try configuring this command in global mode and check ?

same-security-traffic permit intra-interface

http://www.cisco.com/en/US/customer/products/ps6120/products_command_reference_chapter09186a008063f0fb.html#wp1283601

regds

New Member

Re: Ping between Cisco VPN Clients

Hi,

it is amazing, however it was introduced in 7.2(1)(1) release, thank you very much for your information, but my release is 6.3.5

If you have some aditional information about that issue in 6.3 IOS version will be very useful.

Thanks again

Martin C

Re: Ping between Cisco VPN Clients

Hi Martin

I am not sure though about the equivalent command in 6.3 and i dont think so you have an equivalent.

Better to upgrade to the latest verion which 7.2 and use this feature..

regds

479
Views
0
Helpful
3
Replies