Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Pix 501 to 506 IPSec

I have a PIX 506 at my main office and three pix 501's at 3 remote offices.

On of my remote offices had a roof leak and fry on of my 501's.

I have a txt copy of my configurations and I know how to upload the file to my replacement 501.

My question is what do I have to do with the isakmp key on my 506 and the new 501 to make it authenticate and build the tunnel when I bring the replacement up?

TIA

Sean

2 REPLIES
New Member

Re: Pix 501 to 506 IPSec

For IPSEC Configuration go through

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172795.html

And this wil give u to reset the isakmp key to that location.

Chetan

Gold

Re: Pix 501 to 506 IPSec

assuming pre-shared key is deployed with the vpn, then as long as the backup txt has the pre-shared key, no extra step would be required.

providing the key doesn't shown with the txt. the key can be retrieved by tftp the 506 current config to a tftp server. the txt created via tftp server will have the key as clear text.

114
Views
8
Helpful
2
Replies
CreatePlease to create content