Pix 506 and Cisco VPN Client Setup

[mvrcisco]

I am using the following

PIX 506 6.3.1

Cisco VPN Client 4.x

W2K Pro Laptop

PDM

I used the PDM to create remote VPN configuration on the PIX. I set the group name, ip pool, and passwords.

I then installed the 4.x vpn client on the W2K laptop. After attempting to connect I receive the below error.

"Secure VPN Connection Terminated locally by the client. Reason 403: Unable to contact the security gateway."

Any idea what settings I may be missing?

[jasobrown]

No idea as we don't know what you have to know what you are missing ;)