PIX 515, trying to define group to access inside

[mark]

I have a PIX 515 and I need to have just the DMZ machines talk to an inside IP for our UPS that is on the inside.

My DMZ network is 1.1.1.65 with a subnet mask of 255.255.255.224 and my inside 1.1.1.128 with a subnet mask of 255.255.255.128.

I want to keep the config clean, so I was going to create an object group for my DMZ, but I'm running into a wall here. What is the easiest and cleanest way to define those and then create my conduit to connect to my UPS? I don't want to have 3 conduits for each of my DMZ machines!

I need to have 80/tcp, 3052/tcp and 3052/udp accessible from my DMZ to one IP on the inside (1.1.1.171).

Thanks!

[didyap]

Try this link for conduit configuration

http://cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008008c118.html#3100