I have a PIX 515 and I need to have just the DMZ machines talk to an inside IP for our UPS that is on the inside.
My DMZ network is 220.127.116.11 with a subnet mask of 255.255.255.224 and my inside 18.104.22.168 with a subnet mask of 255.255.255.128.
I want to keep the config clean, so I was going to create an object group for my DMZ, but I'm running into a wall here. What is the easiest and cleanest way to define those and then create my conduit to connect to my UPS? I don't want to have 3 conduits for each of my DMZ machines!
I need to have 80/tcp, 3052/tcp and 3052/udp accessible from my DMZ to one IP on the inside (22.214.171.124).
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...