04-03-2008 01:50 PM
Hi,
We are trying to give remote client access to a server on inside interface. We have read alot of similare topics, but still is not working. Can someone please take a look at our configuration and let us know what we are doing wrong?
Our int are as follows:
outside = 204.222.162.0
inside = 192.168.1.1-254
DMZ = 204.222.161.0
Thanks
Solved! Go to Solution.
04-04-2008 09:27 AM
Hi,
you need to have a static nat translation for the internal server.
static(inside,outside)
Then create an access-list to allow access to the the host (public ip) with port..
ex:
access-list out_to_in permit tcp any host 1.1.1.1 eq telnet
Apply the ACL to outside interface.
hth
thank you
MS
04-04-2008 09:31 AM
Hi Stefanie,
Assuming that you have a VPN connection, as you mentioned in your topic title, a static would not solve the issue. Please attach your config.
Regards
04-04-2008 09:27 AM
Hi,
you need to have a static nat translation for the internal server.
static(inside,outside)
Then create an access-list to allow access to the the host (public ip) with port..
ex:
access-list out_to_in permit tcp any host 1.1.1.1 eq telnet
Apply the ACL to outside interface.
hth
thank you
MS
04-04-2008 09:31 AM
Hi Stefanie,
Assuming that you have a VPN connection, as you mentioned in your topic title, a static would not solve the issue. Please attach your config.
Regards
04-04-2008 09:49 AM
Thanks for the info, this solved my issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: