09-20-2005 09:36 AM
Hello,
Pix Version 7.0(1)
ASDM version 5.0(1)
I have a situation where we need to get paas-through VPN functionality going on our PIX 515E. I tried to set this on the pix using a VPN Wizard Site to site
which is enabled. I was unable to connect to the pix from the remote site. witch is log responded the pix negotiate is o.k and success
The problem is when I try to bring up the tunnel up from the remote site. I get dropped without failure.
where can I see the pix vpn log for error?
is there any manual for the VPN site to site solution using the wizard
Please help.
Thanks in advanced
Solved! Go to Solution.
09-20-2005 03:32 PM
the section "use adsm" (step 14) gives an example on how to configure lan-lan vpn via adsm
for log, go to section "verify"
09-20-2005 03:32 PM
the section "use adsm" (step 14) gives an example on how to configure lan-lan vpn via adsm
for log, go to section "verify"
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: