Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 6.3 , ping can't go through ?!

hi all , we have a scenario that a pix is installed in a remote site and has a vpn connection with the HQ (ASA 8) , the vpn is up but the I can't ping the LAN from eithwr both sites , but also I can do remote desktop from both sites ?!! can anyone help please .

3 REPLIES

Re: PIX 6.3 , ping can't go through ?!

Hi,

Check whether ICMP is allowed in your Crypto ACL on both sides.

Also check if icmp inspection is enabled.

policy-map global_policy
    class inspection_default
     inspect icmp

New Member

Re: PIX 6.3 , ping can't go through ?!

first to be clear the HQ has more than one remote site and all are working except the newly configured remote site, on the pix I put the command (fixup protocol icmp error) and still nothing ?! it does not take the commands you mentioned before because its version is 6.3(4) and the ACL regarding the VPN is permit ip => everything is open for now, so do you have something in mind upon this reply ?

Re: PIX 6.3 , ping can't go through ?!

Hi,

Check whether ICMP is allowed in your Crypto ACL on both  sides.

Also check if icmp inspection is enabled.

policy-map global_policy
    class inspection_default
     inspect icmp

369
Views
0
Helpful
3
Replies
CreatePlease login to create content