Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX Firewall Image issue

Hi,

I am downgrading a PIX Firewall from 7.0 to 6.3. I faced probelm when rebooting the PIX.

The error shown as below,

Booting first image in flash

Image must be at least 7-0-0-0 error in file flash:/pix635.bin

No bootable image in flash. Please download an image from a network server

in the monitor mode

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

128 MB RAM

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PIX Firewall Image issue

Did you follow the exact downgrade procedure shown on this link.. did you point the 6.3.x image as indicated

downgrade tftp://tftpserverip/pix63x.bin

pix downgrade procedure from 7.x to 6.3.x

http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html#wp1810347

in any case, you can still redownload the 6.3.5 code again from monitor mode.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml#upbootormon

let us know how it works out.

Rgds

Jorge

1 REPLY

Re: PIX Firewall Image issue

Did you follow the exact downgrade procedure shown on this link.. did you point the 6.3.x image as indicated

downgrade tftp://tftpserverip/pix63x.bin

pix downgrade procedure from 7.x to 6.3.x

http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html#wp1810347

in any case, you can still redownload the 6.3.5 code again from monitor mode.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml#upbootormon

let us know how it works out.

Rgds

Jorge

273
Views
0
Helpful
1
Replies
CreatePlease to create content