cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
368
Views
0
Helpful
3
Replies

PIX ver 7.0 Remote VPN

andujar
Level 1
Level 1

Can I make my Remote Access VPN users go to a DMZ of the same firewall they're using as NAS, I tried this, my users can go with out a problem to the inside network but when they try to go to a DMZ the syslog display "No route to DMZ_HOST_IP from REMOTE_HOST_IP"...I can ping both IPs from the firewall, can anyone help?

1 Accepted Solution

Accepted Solutions

Patrick Laidlaw
Level 4
Level 4

Hello,

Can you give us a little more detail on your network. IE post your configs etc.

So are your VPN users terminating on the outside interface of your firewall or are they using a different VPN device.

I'm guessing your vpn access-lists and nat statements probaby need to be changed.

Patrick

View solution in original post

3 Replies 3

Patrick Laidlaw
Level 4
Level 4

Hello,

Can you give us a little more detail on your network. IE post your configs etc.

So are your VPN users terminating on the outside interface of your firewall or are they using a different VPN device.

I'm guessing your vpn access-lists and nat statements probaby need to be changed.

Patrick

I finally found a static causing the problem and delete it,Thanks for the help

Hi Angel. I would like to know slightly more as I am having a similar problem. What was the static causing the PIX to do?

TIA

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: