02-24-2006 11:24 AM
Can I make my Remote Access VPN users go to a DMZ of the same firewall they're using as NAS, I tried this, my users can go with out a problem to the inside network but when they try to go to a DMZ the syslog display "No route to DMZ_HOST_IP from REMOTE_HOST_IP"...I can ping both IPs from the firewall, can anyone help?
Solved! Go to Solution.
02-24-2006 01:14 PM
Hello,
Can you give us a little more detail on your network. IE post your configs etc.
So are your VPN users terminating on the outside interface of your firewall or are they using a different VPN device.
I'm guessing your vpn access-lists and nat statements probaby need to be changed.
Patrick
02-24-2006 01:14 PM
Hello,
Can you give us a little more detail on your network. IE post your configs etc.
So are your VPN users terminating on the outside interface of your firewall or are they using a different VPN device.
I'm guessing your vpn access-lists and nat statements probaby need to be changed.
Patrick
02-24-2006 02:44 PM
I finally found a static causing the problem and delete it,Thanks for the help
02-24-2006 02:48 PM
Hi Angel. I would like to know slightly more as I am having a similar problem. What was the static causing the PIX to do?
TIA
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide