Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX ver 7.0 Remote VPN

Can I make my Remote Access VPN users go to a DMZ of the same firewall they're using as NAS, I tried this, my users can go with out a problem to the inside network but when they try to go to a DMZ the syslog display "No route to DMZ_HOST_IP from REMOTE_HOST_IP"...I can ping both IPs from the firewall, can anyone help?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PIX ver 7.0 Remote VPN

Hello,

Can you give us a little more detail on your network. IE post your configs etc.

So are your VPN users terminating on the outside interface of your firewall or are they using a different VPN device.

I'm guessing your vpn access-lists and nat statements probaby need to be changed.

Patrick

3 REPLIES

Re: PIX ver 7.0 Remote VPN

Hello,

Can you give us a little more detail on your network. IE post your configs etc.

So are your VPN users terminating on the outside interface of your firewall or are they using a different VPN device.

I'm guessing your vpn access-lists and nat statements probaby need to be changed.

Patrick

New Member

Re: PIX ver 7.0 Remote VPN

I finally found a static causing the problem and delete it,Thanks for the help

New Member

Re: PIX ver 7.0 Remote VPN

Hi Angel. I would like to know slightly more as I am having a similar problem. What was the static causing the PIX to do?

TIA

149
Views
0
Helpful
3
Replies