Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PIX VPN dynamic L2L Tunnel on PIX 515E with Version 7.0(1)

Hi all,

after upgradeing the pix firewall from version 6.3(4) to version 7.0(1) I have problems with my brunch office witch is connected with a dynamic l2l tunnel.

this is the old config from version 6.3(4)

crypto ipsec transform-set myset esp-des esp-md5-hmac

crypto dynamic-map dynmap 30 set transform-set myset

crypto map iwka 20 ipsec-isakmp dynamic dynmap

crypto map iwka interface outside

isakmp enable outside

isakmp key ********* address 0.0.0.0 netmask 0.0.0.0

any ideas, or config samples??

thanks for help

rene

1 REPLY
Silver

Re: PIX VPN dynamic L2L Tunnel on PIX 515E with Version 7.0(1)

What exactly is the problem? Are you facing no connectivity or has the throughput come down after the upgrade. The configuration here looks good. Are you seeing any errors on the console.

150
Views
0
Helpful
1
Replies
CreatePlease to create content