Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

plz help with my asa 5510

i work in jordan as a system admin in the ministry of environment and till recently i was depending on isa2006 and it works just fine , but we have a 5510 asa firewall device which was bought a few years ago but they couldnt work it proberly recently i decided to inhance the security level to use 2 fire wall design and decided to reuse the 5510 but the device was bought long time befor i came to the ministry i tryed to reconfigure it but couldnt connect to it throw the mgmt port so i tryed to reset it using the back buttom but it didnt i work my question is how can i reset this device manually or is there a way to log into the its gui plz help

1 REPLY
Silver

Re: plz help with my asa 5510

You may try upgrading the software image on ASA to the latest version.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml

95
Views
0
Helpful
1
Replies
CreatePlease to create content