03-03-2008 03:18 AM
We try to establish point to multipoint LAN TO LAN VPN
1. for remote side 2821 RT
2. HQ 3060 VPN concentrator
3. HO LAN 3845 RT
we face some of the problem , when we gave the ACL in remote-RT for WAN IP it work but when we try to establish it LAN TO LAN encryption it not work.
Following is my diagram and configuration for VPNC, remote-RT and HQ-RT
03-10-2008 07:06 AM
Check if the configurations are done right on both sides. All the security parameters need to match. Else no data can be sent. Refer the URL http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009482e.shtml for more information.
04-01-2008 01:04 PM
Hi Milon,
Can u pls check the SA for the tunnel in the VPNC. Also check the DH Groups.
Regards
Adnan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: