Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Possible routing or tunneling related to cisco vpn client 5.0.07.0290

I am running a windows 2008 Hyperv host on my home computer, which is also my active domain controller in my house. I have a windows 7 hyperv guest running under my windows 2008 hyper v, it's not part of the domain. The only purpose of this windows 7 setup is so that I can have my vpn connection to the office done underneath it. Unfortunately when vpn connection is active I cannot ping reach my windows 7 from my hyperv host and I can also not reach from windows 7 out to my hyperv host. All my computers / virtual machines are setup for static ip.

The hyper v host (which is also active directory domain controller)

Connection-specific DNS Suffix  . :

IPv4 Address. . . . . . . . . . . : 192.168.1.160

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

The gues windows 7 running under hyper v

Connection-specific DNS Suffix  . :

IPv4 Address. . . . . . . . . . . : 192.168.1.163

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

and cisco vpn configuration

[main]

!Description=XXXXXXXXXXXXXXXXXXXXXXXXXXXX

!Host=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

AuthType=1

!GroupName=XXXXXXXXXXXXXXXXXXX

!GroupPwd=

!enc_GroupPwd=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

EnableISPConnect=0

ISPConnectType=0

ISPConnect=Cisco 800

ISPPhonebook=

ISPCommand=

Username=XXXXXXXXX

SaveUserPassword=0

UserPassword=

enc_UserPassword=

NTDomain=XXXXXXXXXX

EnableBackup=0

BackupServer=

EnableMSLogon=1

MSLogonType=0

EnableNat=1

TunnelingMode=0

TcpTunnelingPort=10000

CertStore=0

CertName=

CertPath=

CertSubjectName=

CertSerialHash=00000000000000000000000000000000

SendCertChain=0

PeerTimeout=90

EnableLocalLAN=0

Is there any way I can some how open some ip address connections even the cisco vpn is connected?

Thank you

1 REPLY
Super Bronze

Possible routing or tunneling related to cisco vpn client 5.0.07

What is configured at the VPN server? All config is pushed from the server towards the VPN Client, so you would need to check the config on the VPN server.

Do you have split tunnel configured? If you don't, you would need to configure split tunnel to be able to access local LAN, and your local LAN can't be in the same subnet as the remote LAN.

1146
Views
0
Helpful
1
Replies