03-29-2017 08:12 AM - edited 02-21-2020 09:13 PM
I am currently trying to set up a Remote Access VPN connection with some posture assessment and the client cannot connect as it is saying Posture Assessment: failed. Any logs I can check or any guidelines?
Thanks
03-29-2017 08:34 AM
hello
Below support forum doc will definitely prove helpful
https://supportforums.cisco.com/document/12205416/information-acquire-dap-troubleshootinghttps://supportforums.cisco.com/document/12205416/information-acquire-dap-troubleshooting
Thanks
Shakti
03-29-2017 08:40 AM
Are you using the ISE Posture with Anyconnect or the ASA Posture using Hostscan? For ISE, you can look at the Posture report for that endpoint that failed. For the Anyconnect client, you can look at the DART bundle after a failed attempt to see what went wrong. Collecting the DART is here:
https://supportforums.cisco.com/document/12747756/how-collect-dart-bundle-anyconnect
On the ASA side, you can run the following debug for DAP to see what endpoint parameters are being sent via Hostscan:
debug dap trace
04-06-2017 07:03 AM
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: