Cisco Support Community
Community Member

pptp vpn and Access List restricted inside addresses

Hello All,

In need of a point in the right direction if you have time.

I have a Cisco 881 with PPTP VPN setup and a number of user accounts for remote support.  All is working ok however the client has requested the creation of a specific user that only has access to 1 single IP on the inside of the network.   Can anyone suggest how I would go about applying an access-list to lock account "cccccc" below down to access 1 internal address.  Please see below my config:

Thanks in advance


vpdn enable


vpdn-group 1

! Default PPTP VPDN group


  protocol pptp

  virtual-template 1


username aaaaaa privilege 15 password 0 bbbbb

username cccccc privilege 0 password 0 ddddd


interface Virtual-Template1

description $FW_INSIDE$

ip unnumbered Dialer0

ip nat inside

ip virtual-reassembly in

peer default ip address pool remotepool

no keepalive

ppp encrypt mppe auto passive

ppp authentication chap ms-chap ms-chap-v2


interface Vlan1

description Native_Office_Vlan$FW_INSIDE$

  ip address

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1452


ip local pool remotepool

Everyone's tags (5)
CreatePlease to create content