Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Problem with GETVPN

Hello Guys

Pls Have a look to the Attached config,and Help me to solve the below issue

R3#ping 239.1.1.1 source loopback 0 repeat 4

Type escape sequence to abort.
Sending 4, 100-byte ICMP Echos to 239.1.1.1, timeout is 2 seconds:
Packet sent with a source address of 150.1.3.3
....

R3#ping 150.1.4.4                          

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/27/76 ms
R3#

2 REPLIES

Re: Problem with GETVPN

Hello Guys

Pls Have a look to the Attached config,and Help me to solve the below issue

R3#ping 239.1.1.1 source loopback 0 repeat 4

Type escape sequence to abort.
Sending 4, 100-byte ICMP Echos to 239.1.1.1, timeout is 2 seconds:
Packet sent with a source address of 150.1.3.3
....

R3#ping 150.1.4.4                          

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/27/76 ms
R3#

Hi,

What is the routing update you are receving for 239.1.1.1 in R3.

Ganesh.H

Community Member

Re: Problem with GETVPN

Hi Freind,in R3 , I Have the normal routing update...

197
Views
5
Helpful
2
Replies
CreatePlease to create content