I have problems with setting up a IPsec VPN between a PIX501 and a UC500. The PIX firewall already can establish a connection with the UC500 but the UC500 just passes the traffic that should be encryptet to it's default gateway. Although I have applied the crypto map to the external interface it seems that the crypto policy is not recognized.
I have been trying for hours to solve the problem but I can't figure it out.
I have attached the UC500 configuration. I hope that someone can help me.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...