Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Problem with L2TP dialer and anyconnect full tunnel

Hi,

<br />When I am defining in anyconnect (also ipsec client) to tunnel all networks the clients are disconnected from their internet dialer (PPPOE or L2TP) and the connection drops.

<br />

2 REPLIES
Silver

Re: Problem with L2TP dialer and anyconnect full tunnel

Configure the PPPoE Client DDR Idle-Timer on an ATM PVC Interface

To configure the PPPoE client DDR idle-timer in interface-ATM-VC configuration mode, use the following commands:

SUMMARY STEPS

1. enable

2. configure {terminal | memory | network}

3. interface atm atm-interface-number

4. pvc vpi/vci

5. pppoe-client dial-pool-number number [dial-on-demand]

6. exit

New Member

Re: Problem with L2TP dialer and anyconnect full tunnel

hi,

I am having problem in ASA SSL client.

165
Views
0
Helpful
2
Replies
CreatePlease to create content