Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Query regarding site to site VPN

Hi Experts,

We have given site to site VPN connectivity to our client . They are reporting that they are not able to access out network due to VPN down.

As I checked on my router it's showing up for Port 4500 & down for 500.

Below find the output

#sh crypto session remote  152.69.248.225     

Crypto session current status

Interface: GigabitEthernet0/0/2

Session status: UP-ACTIVE    

Peer: 152.69.248.225 port 4500

  IKE SA: local 3.148.197.4/4500 remote 152.69.248.225/4500 Active

  IPSEC FLOW: permit ip 3.148.197.0/255.255.255.0 host 170.69.246.2

        Active SAs: 2, origin: crypto map

Interface: GigabitEthernet0/0/2

Session status: DOWN

Peer: 152.69.248.225 port 500

  IPSEC FLOW: permit ip 3.110.96.0/255.255.255.0 host 152.69.246.2

        Active SAs: 0, origin: crypto map

  IPSEC FLOW: permit ip 3.110.97.0/255.255.255.0 host 152.69.246.2

        Active SAs: 0, origin: crypto map

#sh crypto session remote  152.69.248.225  brief

Status: A- Active, U - Up, D - Down, I - Idle, S - Standby, N - Negotiating

        K - No IKE

ivrf = (none)

           Peer     I/F        Username          Group/Phase1_id   Uptime Status

152.69.248.225 Gi0/0/2                            10.130.132.34 01:14:49    UA

Can anyone help me to understand the output.

Security purpose I have changed Ip addresses, so do't confused with ip's.

Also pl's suggest any document which will clear my VPN concept's

Thanks in advance

Surya

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions

Query regarding site to site VPN

Hi Surya,

Please check the below link with common L2L issue ex. It may not 100% address your issue but might help understanding the issue...

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml

Also, if you can postyour device and remote end end device config (if possible), that helps.

Thx

MS

Query regarding site to site VPN

Hello,

As MS suggested we will need to check both devices configurations to start troubleshooting this,

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
4 REPLIES

Query regarding site to site VPN

Hi Surya,

Please check the below link with common L2L issue ex. It may not 100% address your issue but might help understanding the issue...

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml

Also, if you can postyour device and remote end end device config (if possible), that helps.

Thx

MS

Community Member

Query regarding site to site VPN

Hi MS & Julio,

Thanks, to look my issue. But unfortunately I can't post remote side config as it's manage by client & I do not have access.

Hopes link provided by MS will help me to understand the VPN issues.

Thanks,

Surya

Query regarding site to site VPN

Hello,

As MS suggested we will need to check both devices configurations to start troubleshooting this,

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Community Member

Query regarding site to site VPN

Hi Surya,

Please paste the output of the following:

show cry isa sa

show cry ipsec sa peer (peer address)

This can very well tell us if the problem is on your end or on the remote end.

Shikhar Sharma

CCIE Security # 29741

Cisco TAC - VPN Team

358
Views
0
Helpful
4
Replies
CreatePlease to create content