Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Question on connecting a client VPN ASA

Hi Guys,

i have a question about VPN Tunneling. I have one ASA 5505 with static PPPoE Adress outside and local 192.168.202.0/24 Network, acting as an EasyVPN Server. On the other side is another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN Client in client ode. Inside network is 192.168.1.0/24

This works pretty well! But now i have created another user that uses an software EasyVPN client to connect the EasyVPN Server. This works as well.

But how am i able to connect the client network 192.168.1.0/24 over the ASA connections?

Please give me some hint.

1 ACCEPTED SOLUTION

Accepted Solutions

Question on connecting a client VPN ASA

"But how am i able to connect the client network 192.168.1.0/24 over the ASA connections?"

Yes, if you set the split-tunnel ACL correctly you should be able connect to remote-client ASA.

Please follow the split-tunnel configuration method from Cisco doc, from below link.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

Please rate helpful post.

Thanks

Rizwan Rafeek

1 REPLY

Question on connecting a client VPN ASA

"But how am i able to connect the client network 192.168.1.0/24 over the ASA connections?"

Yes, if you set the split-tunnel ACL correctly you should be able connect to remote-client ASA.

Please follow the split-tunnel configuration method from Cisco doc, from below link.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

Please rate helpful post.

Thanks

Rizwan Rafeek

217
Views
0
Helpful
1
Replies
CreatePlease to create content