yups...if...un false...upgrade first all funcionality...and click suport...all the point in memory...hardware and suport aplicatoin but usualy provider have a rule each other to much better contack your server...
Are you talking about load-balancing all traffic across the two public interfaces? If so, then no, the ASA will not perform as you expect. You can only have 1 active default route at a time. You can, however, do something like this:
route outside 0.0.0.0 0.0.0.0
route outside2 220.127.116.11 255.255.255.0
In this configuration, all requests from 18.104.22.168/24 would be able to establish VPN connections to the outside2 interface IP while all other soruces use the outside interface. You will need to specify specific networks that will utilize the outside2 interface for this to work.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...