I recently purchased this business class router for my home setup. i am using private class 192.168 static addresses on my machines, i disabled dhcp on the router. I have timewarner for the ISP which is turbo speed. I wanted to setup the vpn access so when i am at work i can access my resources at home. I installed quickvpn, setup a user name and password on the router. I have my outside wan address. I login no problem, the private ip address internal for my work is 10.200.xxx.xxx so i can login it says its connected all is good so far, i go to run and type in \\computername nothing comes up. 1st issue and the 2nd issue is that after i disconnected it the adpater here on my work pc is now all screwed up. it has a primary wins server address and a secondary wins, we do not use wins.. here is the command line:
the issue is that when i open IE it does now go to my home page nor when i try to go to my homepage which is my help desk ticketing system it goes to some site outside when this is an internal website.
We need to determine first the network connection being used by the computer. If the client computer is behind a router, make sure that port 443 and 60443 is not being blocked because it is the port being use by the device.
1) Use the latest QuickVPN client software v 1.2.11
Refer to the below URL to verify your configuration:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...