I currently have a Cisco VPN 3000 configured to Authenticate Windows Active Directory users. When these users' password is about to expire, it prompts them to change it. I cant seem to find the configuration to mimic this on the ASA5520. I need to have 64BIT OS support on the ASA otherwise I would have stuck with the VPN3000 as it's doing it's job quite well.Does anyone know how to configure the same feature on the ASA5520?
The support for password expiration on the ASA with radius is defined with the command "password management" under the tunnel group where the client connects, as well you need to enable mschap v2 as the authenticating protocol under the ppp settings for tha tunnel group and you need to make sure tha the radius is configured for mschapv2 too. See the following link:
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...