Im having an issue allowing remote desktop from WAN connections while still allowing people form other offices to RDP in as well. The three networks im using are 10.0.1.0 10.0.2.0 10.0.3.0. The .2 and .3 networks have site to sites set up with the .1 network, and they can all transfer data fine. Those two networks can also remote desktop into our server on the 10.0.1.0 network. However I need one of the managers to be able to remote in from home, and every time i put in the static nat command below:
ip nat inside source static tcp 10.0.1.2 3389 X.X.X.X 3389
it breaks the ability for the site to site networks to remote into 10.0.1.2. However the manager on the WAN connection can then RDP into 10.0.1.2. Any ideas?
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...