We are finishing up an AnyConnect user pilot test on an ASA that we use specifically for testing. I now have an ASA VPN load balancing cluster configured for production use. However, there are still some pilot users that have the pilot profiles so they are connecting to the test ASA.
Is there any way to configure the test ASA so that users will be redirected to the production ASA cluster? If so, can you specify the profile to use?
We're in the process of pushing out the production AnyConnect profiles to the users but I'm just wondering if there's a way we can speed things up by having the test ASA redirect connections.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...