Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

reg:vpn error

Dear sir,

i have asa 5505 firewall and it was configured for remote acceses vpn while connecting through the clent sftware(4.0)it was showing 404 error .iam unable to solve this problem why it was showing that error.if anybody help in this iam greatfull to him.

srini

2 REPLIES
Silver

Re: reg:vpn error

If you are unable to do simultaneous login from the same IP address, the Secure VPN connection terminated locally by client. "Reason 412: The remote peer is no longer responding." error message appears. Enable NAT-T in the head end VPN device in order to resolve this error.

Cisco Employee

Re: reg:vpn error

Hi Srini,

I do not see the crypto map applied to the outside interface.

crypto map Outside_map interface outside

Also, couple of quick comments:

1. I do not see a NAT 0 command to bypass NAT for IPSEC VPN Client Traffic.

2. Also, it is recommended that you do not assign the VPN Client Pool from your LAN. It is better to assign a Pool of IP Addresses that is not part of your LAN.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008080f2d1.shtml

Regards,

Arul

*Pls rate if it helps*

243
Views
0
Helpful
2
Replies