Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote access VPN problem

My remote access client are not able to ping inside network.

my concentrator is connected with core switch.

My is also connected in core switch. InterVLN routing is working fine. server and conncentrator is

able to reach other via core switch.

concentrator private Ip address

Public IP address:


Split tunnel is enable for,

Routing on concentrator is is connected via is connected via

Core switch Ip address is

Core switch also has the route

ip route

ip route

ip route

ip route

ip route

ip route

ip route

ip route

ip route

ip route,

As u have tested you are able to connect but not able to reach anywhere, though from internal network I can ping your vpn IP

In VPN session i can see sometimes bytes send and receive, and sometime only sending no recving.

No firewall involoved in the path between the concentrator and desired server

Both connected on same switch but different VLAN. but Inter VLAN routing is working and both are able to ping.

ONly remote access client is not able to reach anywhere.

VPN concentrator has public default filter on public interface and private filter on local interface.


Re: Remote access VPN problem

refer to the troubleshooting guide for all vpn problems present in the link given: