Remote access VPN to a PIX 515E using certificates
I have configured a Cisco 515E PIX for remote access VPN connections using PSK as the authentication type. I would like to be able to add dual factor authentication so the users would require a certificate to VPN into the PIX. I can't find much doco on this topic can anyone point me in the right direction, I would rather configure it using cli but I have access to the asdm. The VPN is working fine at the moment with just the one authentication method.
Re: Remote access VPN to a PIX 515E using certificates
Not sure what you mean by higher level authentication, all I'm trying to do is to use a certificates and psk as part of the VPN authentication process, I cant find much help in the configuration guide.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...