Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Remote Access VPN using DAP

Hi guys,

i am deploying remote access vpn using DAP. I just want to know what is the ACL priority in DAP for? Also what is the difference if i have same priority in all my dap records?

thanks

1 REPLY
Cisco Employee

Re: Remote Access VPN using DAP

Hi,

 

The security appliance uses this value to logically sequence the access lists when aggregating the Network and Web-Type ACLs from multiple DAP records. The security appliance orders the records from highest to lowest priority number, with lowest at the bottom of the table. For instance, a DAP record with a value of 4 has a higher priority than a record with a value of 2. You cannot manually sort them.

 

When multiple DAP records are selected, the access-lists attributes specified in the Network (Firewall) ACL are aggregated to create a Dynamic Access-List for the DAP Firewall ACL.

In the same way, the access-lists attributes specified in the Web-Type (Clientless) ACL are aggregated to create a Dynamic Access-List for the DAP Clientless ACL.

 

Rate if it helps.

 

Regards,

Josue Brenes

TAC - VPN Engineer.

302
Views
0
Helpful
1
Replies
CreatePlease to create content