Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

remote access vpn with 2 wan link in cisco 2911

hi all,

i amhaving cisco 2911 -sec-k9 router.

and i got 2 internet connections from isp one is static ip leased line and the other one i dsl dynamic ip one.

what i want is i need to configure internet loadbalance between these 2 internet and also i need to use static ip for remote access vpna and for my exchange port forwarding.

my dsl line in 100 mps and my leased line 2mb de edicated.

i configured the router as with some example config i got on internet my internet is fine but load balancing not happening and i configured the REMOTE ACCESS VPN  . i am able to connec the remote access vpn but no communication through remote access . i cannot reach any device through remote access.

Note: if load balnacing is not possible can u guide me to how i can configure for internet traffic use dsl line and for remote acess vpn and live exchange port forwarding through leased line.

i am attaching my configuration and also

debug crypto isakmp status

can anyone provide me good solution....

thanks

cyril

1 REPLY
New Member

remote access vpn with 2 wan link in cisco 2911

atleast anybody guide me is this solution is possible or not ?

i am fully relaying on cisco community because i tried one week no luck.

549
Views
0
Helpful
1
Replies