remote site in site to site vpn not accessing server in dmz
I have our lotus sametime (instant messaging) server in the dmz and works from inside and outside as it should. We had a site to site vpn connection with hgnwse and Maltex on our pix, and I moved to the ASA yesterday successfully, well almost. Those two locations can no longer see the sametime server in the dmz. Everything on inside to those locations is working fine (AS400, lotus notes, etc) They could see the dmz while the tunnel was connected to pix, so Im sure its something small im missing. Here is a current config with several items Ive configured but not implemented. The only item that is actually in dmz is sametime server. I have to get issues like this one resolved before moving the more critical servers into it.
from a pc in maltex that Im vnc'd to, I cant ping the 10.2.253.252 (sametime server) or even the 10.2.30.13 (inside interface of asa) I can ping most anything that is on the inside network I think its either an access issue or routing issue.
If WSA stopped responding to Web requests and a reboot fixed it ... may be also if Cisco TAC confirmed you are hit with the Bug CSCve59632
Cisco Bug CSCve59632 affects WSA, As when Certain number o...
This document describes how to configure a site-to-site (LAN-to-LAN) IPSec IKE Version 1 (IKEv1) tunnels using Virtual Tunnel Interface (VTI) between two Cisco ASA. ASA VPN module was enhanced with this logical interface in version 9.7(1) and...
Helps meet PCI compliance.
Threat protection built into ISR and ISRv branch routers and CSR
Complements ISR Integrated Security
Lightweight IPS solution with low TCO (Total Cost of Ownership) and automated s...