11-22-2013 03:28 AM
Hello there,
I have a problem with my remote vpn users. They cant acces internet after they establish vpn connection. I read about split tunnel and i think its right configured, but its not working.
Please if you have the time take a look. I attached my asa 5505 configuration
Best regards.
Solved! Go to Solution.
11-22-2013 04:07 AM
your split-tunneling is configured correct, but the group-policy in which this configuration is done is not applied to the tunnel-group:
tunnel-group monitoring_vpn_group general-attributes
default-group-policy monitoring_vpn_policy
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-22-2013 04:07 AM
your split-tunneling is configured correct, but the group-policy in which this configuration is done is not applied to the tunnel-group:
tunnel-group monitoring_vpn_group general-attributes
default-group-policy monitoring_vpn_policy
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide