12.3 Version
Hi all,
i am configuring site-to-site & RVPN on Cisco 2811 ISR router.My site-to-site tunnel is up and running file no issues
But i am facing difficulties with my Remote vpn
the Rvpn tunnel is up i am able to send the traffic(to the LAN interface of router)but the reply is coming from routers public ip "*(WAN interface). also i am unable to ping the remaining ip addresses in Local LAN
Please check the config :
Ex:
aaa new-model
!
!
aaa authentication login userauth local
aaa authorization network networkauth local
!
username cisco password test
!
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
!
crypto isakmp client configuration group test
key cisco
pool remote-pool
acl 111
crypto ipsec transform-set rvpn esp-3des esp-md5-hmac
!
crypto dynamic-map dm 1
set transform-set rvpn
reverse-route
!
crypto map bind client authentication list userauth
crypto map bind isakmp authorization list networkauth
crypto map bind client configuration address respond
crypto map bind 10 ipsec-isakmp dynamic dm
ip local pool remote-pool 192.168.0.10 192.168.0.50
access-list 111 10.1.1.0 0.0.0.255 192.168.0.0 0.0.0.255.
This is the actual remote vpn configuration in my router
Please post your suggestion
Thanks,
gopikrish