Remote VPN

[gopikrish]

Hi All,

I have configured Remote access VPN between VPN Concentrator 3015 & cisco VPN client 4.0.5

when i tried to connect with VPN client software the connection seems to be OK

but no data traffic is happening between client & Concentrator

When i click on status under tunnel Details

it showing Received =0

does anybody can help me on this issue

[froggy3132000]

Can you post a diagram of your network? Are you doing split-tunneling?

[grant.maynard]

NAT can break a VPN like this - you'd see TX packets but nothing RX on the client.

Is NAT-T enabled on the Concentrator?

On the client?

[gopikrish]

Hi,

you are correct NAT-T is enabled in my client

we have enabled transparent tunneling

and our router is acting as a natting device

thanks for your reply

[ridhwankaja]

hi,

Yr internet is dialup connection is very slow, or try reinstall the vpn client... i attached when it is connected vpn client it shuold receive tunnels status.

Bye

Kaja

[gopikrish]

Hi kaja,

Thanks for sending a snopshot we have disabled a firewall option in a Concentrator .as i already mentioned i am not able send any traffic even in my local lan when the VPN client is connected

i am not able to ping my nearest PC also

what could be the reason??