Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote VPN

Hi All,

I have configured Remote access VPN between VPN Concentrator 3015 & cisco VPN client 4.0.5

when i tried to connect with VPN client software the connection seems to be OK

but no data traffic is happening between client & Concentrator

When i click on status under tunnel Details

it showing Received =0

does anybody can help me on this issue

New Member

Re: Remote VPN

Can you post a diagram of your network? Are you doing split-tunneling?

Re: Remote VPN

NAT can break a VPN like this - you'd see TX packets but nothing RX on the client.

Is NAT-T enabled on the Concentrator?

On the client?

New Member

Re: Remote VPN


you are correct NAT-T is enabled in my client

we have enabled transparent tunneling

and our router is acting as a natting device

thanks for your reply

New Member

Re: Remote VPN


Yr internet is dialup connection is very slow, or try reinstall the vpn client... i attached when it is connected vpn client it shuold receive tunnels status.



New Member

Re: Remote VPN

Hi kaja,

Thanks for sending a snopshot we have disabled a firewall option in a Concentrator .as i already mentioned i am not able send any traffic even in my local lan when the VPN client is connected

i am not able to ping my nearest PC also

what could be the reason??

CreatePlease to create content