Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Replacing the existing ISA with ASA

There is existing IPSEC VPN between two ISA servers, and now i want to replace the headend  ISA with ASA with all the existing rules applied on it. Can you please advice me on anything that will help me on doing this? if there is additional thing to be done on the ASA  please let me know?

Thank You in advance

Mulu

4 REPLIES
Cisco Employee

Re: Replacing the existing ISA with ASA

There is no easy way of doing this. You will have to configure the VPN on the ASA per the following document and using the same parameters on the ISA to match the other end. Put the ASA into production during a maintenance window and troubleshoot any issues with the connection.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml

Hope this helps.

New Member

Re: Replacing the existing ISA with ASA

Thank you for your help and the document is very helpful. I know IPSEC is an open standard, but i want to be sure if there is something specific or

additional configuration apart from the normal on the ASA to communicate with the ISA server since  its another vendor product.

Thank You

Mulu

Cisco Employee

Re: Replacing the existing ISA with ASA

Hi Mulu,

No additional configuration is needed apart from the normal IPSec configuration.

New Member

Re: Replacing the existing ISA with ASA

Thank You Very Much!!!!

211
Views
0
Helpful
4
Replies