Resources for migration from legacy Cisco VPN client to AnyConnect?
As the legacy client is now officially EOL'd, and it is having issues with Windows 7 - the need has presented itself to migrate to AnyConnect.
The complicating issue here is that many of the machines that need to be migrated connect remotely and never touch a corporate LAN - as such - I need to devise a means to remotely and seamlessly (as much as possible) migrate from old to new. Sounds a bit like changing the wings on a flying plane, but I'm guessing others have had to face the same issue. By procrastinating this migration - my hope is that your blood spilled will be mine saved? (Just kidding. Sorta).
Any tips, input, suggestion, procedures, FAQs, good luck wishes, etc. greatly appreciated.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...