Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

route subnet behind site to site to reach each other

Dear All,

I have some VPN site to site ( site B and site C connect to site A ). This subnet 10.0.56.0/28 is behind site B. Another subnet 10.0.56.16/28 is behind site C. I would like to route this 10.0.56.0/28 to reach the subnet 10.0.56.16/28. please check the attached file for more infomation.

Is there any possibility to do this on ASA5520 (site A)? if not is there another way?

any help would be appreciated.

thanks,

Sokdet Heang

3 REPLIES

route subnet behind site to site to reach each other

Yes this is very simple - you just nee to add the remote IP subnets of Site B and Site C to each others interesting ACL and no-nat on all devices including Site A.  Then enable "same-security-traffic permit intra-interface" on Site A

HTH>

New Member

route subnet behind site to site to reach each other

Hi Andrew

it is working now. thanks for your help.

Sokdet Heang

route subnet behind site to site to reach each other

np - glad to help.

300
Views
5
Helpful
3
Replies
CreatePlease to create content