at the moment im having some difficulties to pass some networks through the VPN to a Cisco VPN Client.
The situation is the following. If have an Laptop with the Cisco VPN client which connects to an 2811. This works perfect. The 2811 has an L2L - Tunnel to a pix, which also works. Now i wanna pass the internal network from the pix to the VPN - Client on my Laptop means the 2811 is in the middle.
How to i manage it that my Laptop is able to reach the network behind the pix ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...