Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV016 to RV042G with Dynamic IP?

2 sites, A and B wanting to create a VPN Tunnel between

Site A has static IP on Broadband Router with an RV016, static translations and port forwarding will all be done at this side.

Site B has dynamic IP on Broadband Router with an RV042G. Site B's broadband connection isn't actually ours, so would rather not tinker with Router settings, ie Dynamic DNS and port forwarding.

Is this possible? the Site B RV042G should be bringing up the connection to the Site A RV016, but it appears not to do.

For reference, the RV042G has connected to the RV016, but only with static IP's at both ends.

2 REPLIES
New Member

RV016 to RV042G with Dynamic IP?

Hello,

I believe that any VPN connections would involve configuring a VPN or at least VPN passthrough on both routers. I don't think that you can setup a VPN without adjusting Site B's router.

Alex

New Member

RV016 to RV042G with Dynamic IP?

We have managed to resolve this issue. We set it from Dynamic IP to Dynamic IP and Email address.

If you want to get in touch please email s.jackson@bradfordcollege.ac.uk

thanks

Simon

139
Views
0
Helpful
2
Replies
CreatePlease login to create content