I've got a DIR-655 Wireless-N, that I like the setting and configuration. I want to put the RVS4000 behind it and be able to VPN to my Home/Office network. I'm a bit confused on what ports and my LAN ID and WAN ID should be set to. I believe the RVS4000 needs to be a different subnet than my DIR-655 Home/Office Network. Wondering if anyone has any pointers on how to set this up. Also, if I use QuickVPN with port 443, do I just need to forward this port from DIR-655 to RVS4000?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...