Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

rvs4000

Dear Sirs,

     We have a problem with rvs4000... we need to do a simple VPN using QuickVPN software but every time we try to connect we obtain the same error message: the remote gateway is not responding. do you want to wait?

... log of Quickvpn is:

2010/08/03 16:50:26 [STATUS]Success to disconnect.
2010/08/03 16:59:34 [STATUS]OS Version: Windows Vista
2010/08/03 16:59:34 [STATUS]Windows Firewall Domain Profile Settings: ON
2010/08/03 16:59:34 [STATUS]Windows Firewall Private Profile Settings: OFF
2010/08/03 16:59:34 [STATUS]Windows Firewall Private Profile Settings: OFF
2010/08/03 16:59:35 [STATUS]One network interface detected with IP address 192.168.1.33
2010/08/03 16:59:35 [STATUS]Connecting...
2010/08/03 16:59:35 [DEBUG]Input VPN Server Address = 88.xxx.xxx.xxx
2010/08/03 16:59:35 [STATUS]Connecting to remote gateway with IP address: 88.xxx.xxx.xxx
2010/08/03 16:59:45 [WARNING]Remote gateway wasn't reached...
2010/08/03 16:59:45 [WARNING]Failed to connect.
2010/08/03 16:59:49 [STATUS]Remote gateway was reached by https ...
2010/08/03 16:59:49 [STATUS]Provisioning...
2010/08/03 16:59:58 [STATUS]Success to connect.
2010/08/03 16:59:58 [STATUS]Tunnel is configured. Ping test is about to start.
2010/08/03 16:59:58 [STATUS]Verifying Network...
2010/08/03 17:00:04 [WARNING]Failed to ping remote VPN Router!
2010/08/03 17:00:07 [WARNING]Failed to ping remote VPN Router!
2010/08/03 17:00:10 [WARNING]Failed to ping remote VPN Router!
2010/08/03 17:00:13 [WARNING]Failed to ping remote VPN Router!
2010/08/03 17:00:16 [WARNING]Failed to ping remote VPN Router!
2010/08/03 17:00:29 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.

We only want to do this simple vpn

(internal work lan 10.1.1.x)---(10.1.1.254/RVS4000/88.xxx.xxx.xxx)------internet----(dsl connection with dinamic ip)--- (myhomepc 192.168.1.33)

we try a lot of way without result: we think that it isn't a problem of internet firewall because we also connect a pc for simulate internet on 88.x.x.x.x range... no result...

all vpn passthrought are enabled...

Someone can help us?

With regards

Roberto & Daniele

1 REPLY
New Member

Re: rvs4000

auto-resolved... it seems that quickvpn don't want 2 different ip local address on client pc...

351
Views
0
Helpful
1
Replies