Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

S2S VPN ASA5520 and PIX501

A PIX501 should be able to connect to an ASA5520 on a S2S VPN if they are on the same version of code, etc. correct?

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: S2S VPN ASA5520 and PIX501

They do not need to be on the same version of code. The latest code for a PIX501 is 6.3(5) and an ASA can't run code that low. There is no problem swith each having different spec's.

Hope it helps.

Bronze

Re: S2S VPN ASA5520 and PIX501

They both follow the RFCs, regardless of code version.  You're good to go.

2 REPLIES

Re: S2S VPN ASA5520 and PIX501

They do not need to be on the same version of code. The latest code for a PIX501 is 6.3(5) and an ASA can't run code that low. There is no problem swith each having different spec's.

Hope it helps.

Bronze

Re: S2S VPN ASA5520 and PIX501

They both follow the RFCs, regardless of code version.  You're good to go.

189
Views
0
Helpful
2
Replies
CreatePlease to create content